北京
Intelligent Maintenance and Health Management
XJTU-DV: Open-source dynamic vision dataset for non-contact vibration measurement and fault diagnosis of mechanical systems
XJTU-DV：用于機械系統非接觸振動測量與故障診斷的開源動態視覺數據集
作者：
Xiang Li, Shupeng Yu, Xinrui Chen, Yaguo Lei, Bin Yang, Naipeng Li
引用：
Xiang Li, Shupeng Yu, Xinrui Chen, Yaguo Lei, Bin Yang, Naipeng Li, XJTU-DV: Open-source dynamic vision dataset for non-contact vibration measurement and fault diagnosis of mechanical systems, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100163, https://doi.org/10.1016/j.cjme.2025.100163.
Resonance frequency band analysis-based shock pulse method for quantitative characterization of bearing fault
基于改進型遺傳算法的銑削力自適應控制系統動態優化方法
作者：
Yue Wang, Ying Zhang, Weimin Wang, Zhinong Jiang, Minghui Hu, Liyan Zhang
引用：
Yue Wang, Ying Zhang, Weimin Wang, Zhinong Jiang, Minghui Hu, Liyan Zhang , Resonance frequency band analysis-based shock pulse method for quantitative characterization of bearing fault,Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100092, https://doi.org/10.1016/j.cjme.2025.100092.
Machining Manufacturing
Optimization of a self-tuning force control system for the milling process using a dynamic enhanced genetic algorithm
基于改進型遺傳算法的銑削力自適應控制系統動態優化方法
作者：
Yao Li, Zhengcai Zhao, Ning Qian, Lei Zhang, Wenfeng Ding, Yucan Fu
引用：
Yao Li, Zhengcai Zhao, Ning Qian, Lei Zhang, Wenfeng Ding, Yucan Fu, Optimization of a self-tuning force control system for the milling process using a dynamic enhanced genetic algorithm, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100100, https://doi.org/10.1016/j.cjme.2025.100100.
Rapid flexible clamping technology with intelligent self-adjustment ability for low rigidity aviation stringer parts
具有自調整能力的低剛度航空長桁零件快速柔性裝夾技術
作者：
Te Li, Tian Lan, Haibo Liu, Keming Li, Kuo Liu, Qile Bo, Yongqing Wang
引用：
Te Li, Tian Lan, Haibo Liu, Keming Li, Kuo Liu, Qile Bo, Yongqing Wang, Rapid flexible clamping technology with intelligent self-adjustment ability for low rigidity aviation stringer parts, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100207, https://doi.org/10.1016/j.cjme.2025.100207.
The composite effect of high-speed ultrasonic vibration milling and pickling post-treatment on Ti-6Al-4V fatigue performance
高速超聲振動銑削和酸洗后處理對Ti-6Al-4V疲勞性能的復合影響
作者：
Xin Liu, Zhi Xie, Deyuan Zhang, Xinggang Jiang
引用：
Xin Liu, Zhi Xie, Deyuan Zhang, Xinggang Jiang,The composite effect of high-speed ultrasonic vibration milling and pickling post-treatment on Ti-6Al-4V fatigue performance, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100038, https://doi.org/10.1016/j.cjme.2025.100038.
Optimization method of milling feed rate for complex tool path trajectories based on a constant cutting force prediction model
基于恒切削力預測模型的復雜刀具軌跡銑削進給速度優化方法
作者：
Lingqi Zeng, Hao Zhang, Songjian Wang, Lingsheng Han, Te Li, Haibo Liu, Yongqing Wang
引用：
Lingqi Zeng, Hao Zhang, Songjian Wang, Lingsheng Han, Te Li, Haibo Liu, Yongqing Wang,Optimization method of milling feed rate for complex tool path trajectories based on a constant cutting force prediction model, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100102, https://doi.org/10.1016/j.cjme.2025.100102.
Materials Processing Engineering
Design and mechanical characterization of discretely assembled mechanical metamaterials for macroscale applications
離散組裝機械超材料的設計及宏觀力學表征
作者：
Zhengtao Shu, Ying Zhou, Junjian Fu , Hao Li, Liang Gao
引用：
Zhengtao Shu, Ying Zhou, Junjian Fu, Hao Li, Liang Gao, Design and mechanical characterization of discretely assembled mechanical metamaterials for macroscale applications, Chinese Journal of Mechanical Engineering, Volume 39, 2026,100101, https://doi.org/10.1016/j.cjme.2025.100101.
Fabrication and formation mechanism of polymer microgroove wicks by hot-pressing
聚合物微溝槽吸液芯結構熱壓成形及其機理研究
作者：
Heng Tang, Ruibo Zhang, Chao Yan, Jiangyi Chen, Yalong Sun, Yong Tang
引用：
Heng Tang, Ruibo Zhang, Chao Yan, Jiangyi Chen, Yalong Sun, Yong Tang, Fabrication and formation mechanism of polymer microgroove wicks by hot-pressing, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100067, https://doi.org/10.1016/j.cjme.2025.100067.
Effect of femtosecond-laser process parameters on the surface structure and anti-reflection of surface texture
飛秒激光加工參數對表面紋理結構及抗反射性能的影響
作者：
Bing Zhong, Xiaoren Lv, Yanfei Huang, Weiling Guo, Zhiguo Xing, Haidou Wang, Yanfang Zhang
引用：
Bing Zhong, Xiaoren Lv, Yanfei Huang, Weiling Guo, Zhiguo Xing, Haidou Wang, Yanfang Zhang, Effect of femtosecond-laser process parameters on the surface structure and anti-reflection of surface texture, Chinese Journal of Mechanical Engineering, Volume 39, 2026,100076, https://doi.org/10.1016/j.cjme.2025.100076.
Mechanical Tribology and Surface Technology
Influence mechanism of surface treatment on the wear and adhesion at the frictional interface of 2A14T6 aluminum alloy
表面處理對 2A14T6 鋁合金摩擦界面磨損和粘著的影響機理研究
作者：
Yinbo Li, Jingle Cao, Youwei Chen, Yi Zhang, Xuhui Sun, Chengcheng Yu, Guoxin Xie
引用：
Yinbo Li, Jingle Cao, Youwei Chen, Yi Zhang, Xuhui Sun, Chengcheng Yu, Guoxin Xie, Influence mechanism of surface treatment on the wear and adhesion at the frictional interface of 2A14T6 aluminum alloy,Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100069, https://doi.org/10.1016/j.cjme.2025.100069.
Improved drag reduction properties of biomimetic surface with cross-scale arrayed structures based on a comparative simulation study
基于對比模擬研究的跨尺度陣列結構仿生表面的減阻性能改進研究
作者：
Shizheng Chen, Zhuonan Liu, Peiquan Yu, Weihao Wan, Qing Zhao, Jialin Li, Xiaoping Huang
引用：
Shizheng Chen, Zhuonan Liu, Peiquan Yu, Weihao Wan, Qing Zhao, Jialin Li, Xiaoping Huang, Improved drag reduction properties of biomimetic surface with cross-scale arrayed structures based on a comparative simulation study, Volume 39, 2026, 100087, https://doi.org/10.1016/j.cjme.2025.100087.
Mechanism and Robotics
Fully flexible wearable pouch pneumatic artificial muscle based on asymmetric expansion
一種基于非對稱膨脹的全柔性可穿戴袋型氣動人工肌肉
作者：
Jingyi Lu, Xiaosen Lv, Jianbin Liu, Haitao Liu, Tian Huang
引用：
Jingyi Lu, Xiaosen Lv, Jianbin Liu, Haitao Liu, Tian Huang,Fully flexible wearable pouch pneumatic artificial muscle based on asymmetric expansion, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100085, https://doi.org/10.1016/j.cjme.2025.100085.
Robust 3D object tracking with X-Triplet markers: A machine learning-based approach
利用3X組合標記的3D目標魯棒跟蹤：一種基于機器學習的方法
作者：
Cai Meng, Yue Zeng, Hongbin Shen, Xinliang Deng, Diansheng Chen
引用：
Cai Meng, Yue Zeng, Hongbin Shen, Xinliang Deng, Diansheng Chen, Robust 3D object tracking with X-Triplet markers: A machine learning-based approach, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100068, https://doi.org/10.1016/j.cjme.2025.100068.
Adaptive robust control of multi-DOF hydraulic manipulator with precise online load estimation
多自由度液壓機械臂的自適應魯棒控制與在線精確載荷估計
作者：
Qixian Wang, Manzhi Qi, Yangxiu Xia, Shizhao Zhou, Zheng Chen
引用：
Qixian Wang, Manzhi Qi, Yangxiu Xia, Shizhao Zhou, Zheng Chen, Adaptive robust control of multi-DOF hydraulic manipulator with precise online load estimation，Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100072, https://doi.org/10.1016/j.cjme.2025.100072.
Optimal design of a novel dual-axis parallel solar tracker
一種新型雙軸并聯式太陽能跟蹤器的優化設計
作者：
Bin Zhu, Liping Wang, Jun Wu, Hengchun Cui, Yanling Tian
引用：
Bin Zhu, Liping Wang, Jun Wu, Hengchun Cui, Yanling Tian , Optimal design of a novel dual-axis parallel solar tracker, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100108, https://doi.org/10.1016/j.cjme.2025.100108.
Type synthesis method of high-precision double-layer parallel pointing mechanism
高精度雙層并聯指向機構構型綜合方法研究
作者：
Sen Wang, Jun Cai, Bing Li, Fujun Peng
引用：
Sen Wang, Jun Cai, Bing Li, Fujun Peng, Type synthesis method of high-precision double-layer parallel pointing mechanism, Chinese Journal of Mechanical Engineering, Volume 39 ,2026, 100132, https://doi.org/10.1016/j.cjme.2025.100132.
A general construction method of reconfigurable deployable polyhedral mechanisms with the circumscribed sphere
可重構展開多面體機構的通用構造方法及其外接球
作者：
Shuo Zhang, Ruiming Li, Xianhong Zhang, Yan-an Yao
引用：
Shuo Zhang, Ruiming Li, Xianhong Zhang, Yan-an Yao, A general construction method of reconfigurable deployable polyhedral mechanisms with the circumscribed sphere, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100079, https://doi.org/10.1016/j.cjme.2025.100079.
Analysis of dynamic rolling process for tetrahedral mobile robot with only revolute joints (TMRR)
僅含轉動副關節的四面體移動機器人（TMRR）動態滾動過程分析
作者：
Shaoheng Hu, Yezhuo Li, Ruiming Li, Ran Liu, Yanan Yao
引用：
Shaoheng Hu, Yezhuo Li, Ruiming Li, Ran Liu, Yanan Yao, Analysis of dynamic rolling process for tetrahedral mobile robot with only revolute joints (TMRR), Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100015, https://doi.org/10.1016/j.cjme.2025.100015.
Design, analysis, and test of novel compliant rotation-reduction mechanism
一種新型柔順轉角縮小機構的設計、分析與測試
作者：
Yujie Xu, Weilin Chen, Qinghua Lu, Qinghua Zhang, Huiling Wei, Zeqin Lin, Lufeng Luo
引用：
Yujie Xu, Weilin Chen, Qinghua Lu, Qinghua Zhang, Huiling Wei, Zeqin Lin, Lufeng Luo, Design, analysis, and test of novel compliant rotation-reduction mechanism, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100080, https://doi.org/10.1016/j.cjme.2025.100080.
New Energy and Intelligent Connected Vehicles
Autonomous driving scenario generation based on neural radiance fields or 3D Gaussian splatting: State-of-the-art investigations, reviews, and perspectives
基于神經輻射場與三維高斯散點的自動駕駛場景生成：前沿研究綜述與展望
作者：
Wei Zhou, Wenbo Chu, Yue Tian, Tianyang Fei, Yulong Ding, Xiaolin Tang, Keqiang Li
引用：
Wei Zhou, Wenbo Chu, Yue Tian, Tianyang Fei, Yulong Ding, Xiaolin Tang, Keqiang Li, Autonomous driving scenario generation based on neural radiance fields or 3D Gaussian splatting: State-of-the-art investigations, reviews, and perspectives, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100093, https://doi.org/10.1016/j.cjme.2025.100093.
Whole-body trajectory optimization for skid steer wheeled-legged vehicles
滑移轉向輪腿式車輛全身軌跡優化方法
作者：
Mingfan Xu, Ziyi Yang, Chuyan Xu, Kui Wang, Yu Zhang, Yechen Qin
引用：
Mingfan Xu, Ziyi Yang, Chuyan Xu, Kui Wang, Yu Zhang, Yechen Qin, Whole-body trajectory optimization for skid steer wheeled-legged vehicles, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100128, https://doi.org/10.1016/j.cjme.2025.100128.
Development of an asymmetric arc-shaped magnetic coupler for the AUV wireless charging system
用于AUV無線充電系統的非對稱弧形磁耦合器研制
作者：
Shuo Gong, Mingwei Lin, Dejun Li, Ri Lin, Canjun Yang
引用：
Shuo Gong, Mingwei Lin, Dejun Li, Ri Lin, Canjun Yang, Development of an asymmetric arc-shaped magnetic coupler for the AUV wireless charging system, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100130, https://doi.org/10.1016/j.cjme.2025.100130.
Enhanced mobility through the coordinated control of longitudinal-lateral-vertical motion for distributed drive vehicle
面向動力性增強的分布式驅動越野車輛縱-橫-垂向協調控制研究
作者：
Hongliang Wang, Xiaoqing Xu, Dawei Pi, Weihua Wang, Yijie Chen, Jianing Wang
引用：
Hongliang Wang, Xiaoqing Xu, Dawei Pi, Weihua Wang, Yijie Chen, Jianing Wang, Enhanced mobility through the coordinated control of longitudinal-lateral-vertical motion for distributed drive vehicle, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100047, https://doi.org/10.1016/j.cjme.2025.100047.
Boundary conditions for setting thorax impactor subsystem tests to assess vehicle safety performance on protection of vulnerable road users
面向車輛安全評估的弱勢道路使用者胸部撞擊器測試邊界條件研究
作者：
Guibing Li, Wenbo Gao, Xiaojiang Lv, Zhi Xiao, Fuhao Mo
引用：
Guibing Li, Wenbo Gao, Xiaojiang Lv, Zhi Xiao, Fuhao Mo, Boundary conditions for setting thorax impactor subsystem tests to assess vehicle safety performance on protection of vulnerable road users, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100125, https://doi.org/10.1016/j.cjme.2025.100125.
Comparative analysis of wheel-rail adhesion degradation and contact stress distribution on typical metro tracks
典型地鐵軌道的輪軌黏著力退化和接觸應力分布對比分析
作者：
Tao Zhang, Yunfan Yang, Liang Ling, Yuedong Wang, Kaiyun Wang
引用：
Tao Zhang, Yunfan Yang, Liang Ling, Yuedong Wang, Kaiyun Wang, Comparative analysis of wheel-rail adhesion degradation and contact stress distribution on typical metro tracks, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100112, https://doi.org/10.1016/j.cjme.2025.100112.
Modeling and dynamic characteristics analysis of the locomotive considering the electric transmission system
考慮電傳動系統的機車建模與動態特性分析
作者：
Ziwei Zhou, Zaigang Chen, Maksym Spiryagin, Jamshid Aghaei, Colin Cole, Wanming Zhai
引用：
Ziwei Zhou, Zaigang Chen, Maksym Spiryagin, Jamshid Aghaei, Colin Cole, Wanming Zhai, Modeling and dynamic characteristics analysis of the locomotive considering the electric transmission system, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100099, https://doi.org/10.1016/j.cjme.2025.100099.
Transmission and Drive
A predictive modeling for the variation of orifice throttling coefficient of hydraulic spool valve caused by erosion behavior
液壓滑閥孔口節流系數受侵蝕影響的變化預測模型
作者：
Xiaochao Liu, Dingbo Li, Honghui Liao, Peiyao Hou, Rui Nie, Pengyuan Qi, Zongxia Jiao
引用：
Xiaochao Liu, Dingbo Li, Honghui Liao, Peiyao Hou, Rui Nie, Pengyuan Qi, Zongxia Jiao, A predictive modeling for the variation of orifice throttling coefficient of hydraulic spool valve caused by erosion behavior, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100007, ISSN 1000-9345, https://doi.org/10.1016/j.cjme.2025.100007.
Dynamic performance improvement of high-speed on/off valve based on pre-excitation bootstrap control
基于預激勵自舉控制的高速啟閉閥動態性能提升
作者：
Qi Zhong, Enguang Xu, Xianjian He, Junxian Wang, Huayong Yang
引用：
Qi Zhong, Enguang Xu, Xianjian He, Junxian Wang, Huayong Yang, Dynamic performance improvement of high-speed on/off valve based on pre-excitation bootstrap control, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100036, https://doi.org/10.1016/j.cjme.2025.100036.
https://www.sciencedirect.com/science/article/pii/S1000934525000392
Opening torque of a butterfly vent valve considering pollution particle intrusion
考慮污染顆粒侵入的蝶閥開啟扭矩研究
作者：
Jin Zhang, Zitong Gao, Yan Yue, Wenlong Yin, Lijiang Pan, Yu Chen
引用：
Jin Zhang, Zitong Gao, Yan Yue, Wenlong Yin, Lijiang Pan, Yu Chen, Opening torque of a butterfly vent valve considering pollution particle intrusion, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100073, https://doi.org/10.1016/j.cjme.2025.100073.
Analysis, modeling, and experimental evaluation of a double-stator piezoelectric inertial actuator driven by different phase angles of the driving current
基于不同驅動電流相位角的雙定子壓電慣性作動器的分析、建模與實驗評估
作者：
Lusheng Yuan, Liang Wang, Yan Li, Rui Qi, Jiamei Jin, Chunsheng Zhao
引用：
Lusheng Yuan, Liang Wang, Yan Li, Rui Qi, Jiamei Jin, Chunsheng Zhao, Analysis, modeling, and experimental evaluation of a double-stator piezoelectric inertial actuator driven by different phase angles of the driving current, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100078, https://doi.org/10.1016/j.cjme.2025.100078.
Semi-analytical modeling and dynamic improvement of a high-speed on/off valve considering nonlinear flux leakage of working air gaps
考慮工作氣隙非線性漏磁的高速開關閥半解析建模與動態性能改進
作者：
Lingkang Meng, Defa Wu, Xujun Ye, Jize Jiang, Zhuo Mi, Yinshui Liu
引用：
Lingkang Meng, Defa Wu, Xujun Ye, Jize Jiang, Zhuo Mi, Yinshui Liu, Semi-analytical modeling and dynamic improvement of a high-speed on/off valve considering nonlinear flux leakage of working air gaps, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100077, https://doi.org/10.1016/j.cjme.2025.100077.
Modeling of bolted beam utilizing modified joint element and identification of contact parameters at the joint
基于改進連接單元的螺栓連接梁建模及接觸參數辨識
作者：
Xiang Li, Zhousuo Zhang, Zhuofan Zhou, Dian Chen
引用：
Xiang Li, Zhousuo Zhang, Zhuofan Zhou, Dian Chen, Modeling of bolted beam utilizing modified joint element and identification of contact parameters at the joint, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100081, https://doi.org/10.1016/j.cjme.2025.100081.
A method for enhancing the output force of a stroke-controlled electro-mechanical converter of 2D servo-proportional valves based on the principle of “magnetic dam”
基于磁壩原理的二維比例伺服閥用位移控制型電-機械轉換器輸出力增強方法
作者：
Leidi Wang, Bin Meng, Jian Ruan
引用：
Leidi Wang, Bin Meng, Jian Ruan, A method for enhancing the output force of a stroke-controlled electro-mechanical converter of 2D servo-proportional valves based on the principle of “magnetic dam”, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100105, https://doi.org/10.1016/j.cjme.2025.100105.
Numerical and experimental study on the influence of piston combined motion on churning losses in axial piston pumps
活塞組合運動對軸向柱塞泵攪拌損失影響的數值與實驗研究
作者：
Ying Li, Yasen Yang, Xincheng Wang, Hao Luo, Jin Zhang, Xiangdong Kong
引用：
Ying Li, Yasen Yang, Xincheng Wang, Hao Luo, Jin Zhang, Xiangdong Kong, Numerical and experimental study on the influence of piston combined motion on churning losses in axial piston pumps, Chinese Journal of Mechanical Engineering, Volume 39, 2026, 100075, https://doi.org/10.1016/j.cjme.2025.100075.
Comparative research on pressure pulsation characteristics of an axial piston pump with two different valve plates
兩種不同閥板軸向柱塞泵壓力脈動特性的對比研究
作者：
Xiaonan Hou, Yizheng Duan, Wei Wu, Xueyuan Li, Shihua Yuan, Chunhui Wei
引用：
Xiaonan Hou, Yizheng Duan, Wei Wu, Xueyuan Li, Shihua Yuan, Chunhui Wei, Comparative research on pressure pulsation characteristics of an axial piston pump with two different valve plates, Chinese Journal of Mechanical Engineering,Volume 39, 2026, 100118, https://doi.org/10.1016/j.cjme.2025.100118.
責任編輯：杜蔚杰
責任校對：向映姣
審 核：張 彤
JME學院簡介
JME學院是由《機械工程學報》編輯部2018年創建，以關注、陪伴青年學者成長為宗旨，努力探索學術傳播服務新模式。
歡迎各位老師掃碼添加小助理-暖暖為好友，由小助理拉入JME學院官方群！
歡迎關注JME學院視頻號~
尋覓合作伙伴
有一種合作叫做真誠，有一種發展可以無限，有一種伙伴可以互利共贏，愿我們合作起來流連忘返，發展起來前景可觀。關于論文推薦、團隊介紹、圖書出版、學術直播、招聘信息、會議推廣等，請與我們聯系。
感謝關注我們！我們《機械工程學報》編輯部將努力為您打造一個有態度、有深度、有溫度的學術媒體！
版權聲明：
本文為《機械工程學報》編輯部原創內容，歡迎轉載，請聯系授權！
在公眾號后臺留言需要轉載的文章題目及要轉載的公眾號ID以獲取授權!
微信投稿、轉載等：
聯系人：暖暖
電話：010-88379909
E-mail：jme@cmes.org
網 址：http://www.cjmenet.com.cn
官方微信號：jmewechat
特別聲明：以上內容(如有圖片或視頻亦包括在內)為自媒體平臺“網易號”用戶上傳并發布，本平臺僅提供信息存儲服務。
Notice: The content above (including the pictures and videos if any) is uploaded and posted by a user of NetEase Hao, which is a social media platform and only provides information storage services.
